Navigation: Home > Challenger > MT285B
Challenger MT285B Tractors
|
|
Power: 47 hp
Date of manufacture : 2005 - 2008 |
Production |
Distributor: | Challenger (a part of AGCO)
|
Manufacturer: | Iseki
|
Type: | Compact Utility tractor
|
Factory: | Matsuyama, Japan
|
Variants |
Massey Ferguson 1547 |
Challenger MT285B Power |
Engine (gross): | 47.5 hp 35.4 kW
|
Engine (net): | 44.5 hp 33.2 kW
|
Gear PTO (claimed): | 38.0 hp 28.3 kW
|
Hydro PTO (claimed): | 36.5 hp 27.2 kW
|
Mechanical |
Chassis: | 4x4 MFWD 4WD
|
Final drives: | spur gear
|
Differential lock: | mechanical rear
|
Steering: | power
|
Brakes: | wet disc
|
Cab: | Two-post foldable ROPS. Cab optional with air-condtioning.
|
Transmissions: | hydrostatic
|
| 8-speed
|
| 12-speed partially synchronized with power shuttle
|
Photos |
| Challenger MT285B photos... |
Capacity |
Fuel: | 13.2 gal 50.0 L
|
Hydraulic system: | 10 gal 37.9 L
|
Hydraulics |
Type: | open center
|
Capacity: | 10 gal 37.9 L
|
Pressure: | 2276 psi 156.9 bar
|
Rear valves: | 2*Optional
|
Mid valves: | 2*Optional
|
Pump flow: | 10.5 gpm 39.7 lpm
|
Total flow: | 14.9 gpm 56.4 lpm (sync shuttle)
|
| 15.9 gpm 60.2 lpm (power shuttle/hydro)
|
Steering flow: | 4.4 gpm 16.7 lpm (sync shuttle)
|
| 5.4 gpm 20.4 lpm (power shuttle/hydro)
|
Steering press.: | 2276 psi 156.9 bar
|
Tractor hitch |
Rear Type: | I
|
Control: | position and response control
|
| optional top-link draft control
|
Rear lift (at ends): | 3483 lbs 1579 kg
|
Rear lift (at 24"/610mm): | 3086 lbs 1399 kg
|
Rear Arms: | telescopic link ends
|
Power Take-off (PTO) |
Rear PTO: | independent
|
Clutch: | electro-hydraulic wet disc
|
Rear RPM: | 540 (1.375)
|
Mid PTO: | independent*Optional
|
Mid RPM: | 2000 (1.00)
|
Dimensions & Tires |
Wheelbase: | 76 inches 193 cm
|
Weight: | 3660 lbs 1660 kg
|
Front tire: | 9.5-16
|
Rear tire: | 16.9-24
|
Electrical |
Ground: | negative
|
Charging system: | alternator
|
Charging amps: | 40
|
Battery CCA: | 710
|
Battery volts: | 12
|
|